something about telecommunication....
Digital cellular networks are the segment of the market for mobile and
wireless devices which are growing most rapidly. They are the wireless
extensions of traditional PSTN or ISDN networks and allow for seamless
roaming with the same mobile phone nation or even worldwide. Today, these
systems are mainly used for voice traffic. However, data traffic is continuously
growing and, therefore, this chapter presents several technologies for wireless
data transmission using cellular systems.1
The systems presented fit into the traditional telephony architecture and do
not originate from computer networks. The basic versions typically implement a
circuit-switched service, focused on voice, and only offer data rates of up to,
e.g., 9.6 kbit/s. However, service is provided up to a speed of 250 km/h (e.g.,
using GSM in a car) where most other wireless systems fail.
The worldwide market figures for cellular networks are as follows (GSM
Association, 2002). The most popular digital system is GSM, with approximately
70 per cent market share. (This system will be presented in section 4.1.) The
analog AMPS system still holds three per cent, whereas the Japanese PDC holds
five per cent (60 million users). The remainder is split between CDMA (12 per
cent) and TDMA (10 per cent) systems, and other technologies. In Europe
almost everyone uses the digital GSM system (over 370 million) with almost no
analog systems left. The situation is different in the US and some other countries
that have adopted US technology (e.g., South Korea, Canada). Here, the
digital market is split into TDMA, CDMA, and GSM systems with 107 million
TDMA, 135 million CDMA, and only 16 million GSM users (North America
only). While only one digital system exists in Europe, the US market is divided
into several systems. This leads to severe problems regarding coverage and service
availability, and is one of the examples where market forces did not ensure
improved services (compared to the common standard in Europe).
Figure 4.1 shows the worldwide number of subscribers to different mobile
phone technologies (GSM Association, 2002). The figure combines different versions
of the same technology (e.g., GSM working on 900, 1,800, and 1,900 MHz).
The two upper lines in the graph show the total number of users and the predictions
from 1998. It is interesting that no one foresaw the tremendous success of
the mobile communication technology. The graph shows, too, that the time for
analog systems is over and GSM is heavily dominating the current market. GSM,
TDMA, CDMA, and PDC are all second generation systems. It is important to
note that today more people use mobile phone systems than fixed telephones!
The graphs of mobile and fixed users crossed in March 2002.
The following sections present prominent examples for second generation
(2G) mobile phone networks, cordless telephones, trunked radio systems, and
third generation (3G) mobile phone networks. This chapter uses GSM as the
main example for a 2G fully digital mobile phone system, not only because of
market success, but also due to the system architecture that served many other
systems as an early example. Other systems adopted mobility management,
mobile assisted handover and other basic ideas (Goodman, 1997), (Stallings,
2002), (Pahlavan, 2002). While US systems typically focus on the air interface
for their specification, a system like GSM has many open interfaces and network
entities defined in the specification. While the first approach enables companies
to have their own, proprietary and possibly better solutions, the latter enables
network providers to choose between many different products from different
vendors. DECT and TERTA are used, respectively as examples for cordless telephony
and trunked radio systems. One reason for this is their system
architecture which is similar to GSM. This is not very surprising as all three systems
have been standardized by ETSI. The main focus is always on data service,
so the evolution of GSM offering higher data rates and packet-oriented transfer
is also presented. The chapter concludes with UMTS as a prominent example for
3G mobile telecommunication networks. UMTS is Europe’s and Japan’s proposal
for the next generation mobile and wireless system within the ITU IMT-2000
framework. The early phases of UMTS show the evolutionary path from GSM
via GSM with higher data rates to UMTS, which allows for saving a lot of investment
into the infrastructure. Later phases of UMTS development show more
and more the integration of Internet technology that simplifies service creation
and offers a migration path to more advanced networks.
Figure 4.2 shows several development and migration paths for different
mobile telecommunication systems presented in this chapter. The diagram is
divided into the three main multiplexing schemes, FDMA, TDMA, and CDMA.
The figure classifies the technologies into three generations. The first generation
comprises analog systems, which typically rely on FDMA. The first 2G systems
hit the market in the early nineties. In the US D-AMPS was a digital successor of
AMPS, in Europe GSM was developed as a replacement for several versions of
NMT, and PDC was introduced in Japan. All these 2G systems introduced a
TDMA mechanism in addition to FDMA, which is still used for channel separation.
With cdmaOne the first CDMA technology was available in the US as a
competitor to the TDMA technologies. Between the second and third generation
there is no real revolutionary step. The systems evolved over time: GPRS
introduced a packet-oriented service and higher data rates to GSM (but can also
be used for TDMA systems in general), EDGE proposes a new modulation
scheme, and cdmaOne was enhanced to cdma2000 1x offering higher data
rates. These systems are often called 2.5G systems.2 Most, but not all, systemsadded CDMA technology to become 3G systems. Cordless telephone systems
started with CT0 and CT1, became digital with CT2, and ended in Europe in the
fully digital standard DECT. This standard has even been chosen as one of the
candidates for a 3G system (IMT-FT).
While the number of different systems might be confusing, there are some
“natural” development paths. Most network providers offering GSM service
today will deploy UMTS, while cdmaOne users will choose cdma2000 for simpler
migration. The reasons for this are quite simple. With the introduction of GPRS
in GSM networks, the core of the network was already enhanced in a way that it
can be directly used for UMTS with the radio technologies UTRA FDD and UTRA
TDD. A similar path for evolution exists for TD-SCDMA, the Chinese proposal
for a 3G system (which has been integrated into UTRA TDD). With some simplification
it can be said that UMTS mainly adds a new radio interface but relies in
its initial phase on the same core network as GSM/GPRS. Also for cdmaOne the
evolution to cdma2000 technologies is quite natural, as the new standard is
backward compatible and can reuse frequencies. Cdma2000 1x still uses the same
1.25 MHz channels as cdmaOne does, but offers data rates of up to 153 kbit/s.
The cdma2000 3x standard uses three 1.25 MHz channels to fit into ITU’s frequency
scheme for 3G. However, this standard is not pushed as much as the
following enhancements of cdma2000 1x. These enhancements are:
● cdma2000 1x EV-DO (evolution-data optimized, also known as high data
rate (HDR), some call it data only) promising peak data rates of 2.4 Mbit/s
using a second 1.25 MHz channel; and
● cdma2000 1x EV-DV (evolution-data and voice) aiming at 1.2 Mbit/s for
mobile and 5.2 Mbit/s for stationary users.
Cdma2000 1x EV-DO was the first version of cdma2000 accepted by the ITU as
3G system.

No comments:
Post a Comment